Innovative support system with Megaprop struts in “W” that takes the load of the full width of the board (36m) to supports centered on the foundations of the 2 temporary

Structure of shoring towers and gantry system Megaprop of formwork support composed of Superslim and T200 beams, for the execution of Arco del Puente del Tercer Milenio, which served as

Multiple porticoed structure of RMDK standard profiling, supported on Megaprop towers and load scaffolding for box section bridge. It allows the transit through triple mixed portico during the execution of

Formwork, curved Kwistage formwork and gantry with R700 trusses for spans up to 40 m.

Support beam of board on pylons with Megatrus latticework and formwork with Superslim beams and wooden beams.

Example of combination of different solutions to support porticoed system. With Megaprop towers that, depending on the span, support RMDK standard profiles or R700 trusses, for the support of a

“V” stack formwork formed by Superslim and T200 beams. Falsework consisting of R700 trusses and Megaprop towers.

Kwikstage formwork system as a support for shuttering ships formed by Superslim and T200 beams for execution of viaduct with box section. This is an economic system and of high

Megaprop structure hung in stack for on-site execution of the upper lintel.

Climbing formwork for stacks up to 70 m. of height with advance of 5 m. per laying.

Wing carriage for widening of the viaduct board, with traffic maintenance. Structure composed of Superslim, Megaprop and Megatruss beams (up to 5 m of bending and max bending moment of