Con motivo de la construcción de un edificio de oficinas, que estará situado en la esquina entre el Paseo de la Castellana y la calle Ayala de Madrid, y cuya

On the occasion of the construction of a new residential space in what were the old garages and workshops of the Madrid metro, designed by Antonio Palacios and which are

  Cyopsa, contractor for the construction of an indoor swimming pool at 3, Cea Bermúdez st. in Madrid, commissioned Incye the design and erection of a falsework system for the

Façade retention for a property located in downtown Valencia. Located on a pedestrian street, it was a basic condition to maintain access to the surrounding parking lots as well as

               Estabilizador de fachada para edificio situado en el centro de la ciudad de Valencia. La tipología peatonal de la calle, la necesidad de mantener el acceso a los garajes

Estabilización de tres fachadas y apeo de cornisa del mayor edificio del Casco Vello de Vigo, consta de tres alturas (B+II) y la tipología del edificio es la propia de

Removal of roof structure made with gantries and Megaprop towers of up to 35 m height. Clear sample of the great versatility of Megaprop mechano.

Formwork forged with Slimdek, composed of sopandas, portaasopanda and struts up to 6 m., With lining of three-layer boards.

For the execution of the slabs of the largest hopital complex in the country, the design of Alshor Plus aluminum panels was chosen, which allows, thanks to their movement without

The curved Reflex formwork withstands concrete loads of up to 60 KN / m2 and can easily be adjusted to be reused from one site to another, without dismantling, for

Structure of Megaprop towers over 25 m height to support canvas of protection of the works for hotel in coastal zone. System that allows support of high wind loads.

Light system of Minima wall formwork. It is a modular system by panels that allows use without cranes thanks to its low weight (30kg / m2), maintaining high load capacities

Structure with Superslim beam for the shoring of slope in risk of detachment. Thanks to the versatility of the Meca Superslim, any structure for load stabilization is possible.

Slab formwork made with independent panels of the Alshor Plus system and 2 levels of aluminum beams These panels move horizontally with wheels and vertically with “C” hook adapting to

Work platform supported by brackets for restoration.

The building has a W-floor created from different structural modules executed at different times. It was necessary to maintain most of the facades, except for the roof lattice masts and