Con motivo de la construcción de 30 viviendas situada en la calle Provença 309 de Barcelona y cuya realización se encuentra adjudicada a la Empresa Archs Constructora, ha sido necesaria

Incye was hired by Ferrovial Agromán S.A. to design and install the groundshoring solution for Andén Retiro development, located at 58 Cavanilles st, in Madrid. The shoring system reached 5

Con motivo de la construcción de 105 viviendas del promotor Gran Roque, en la parcela situada en la confluencia de las calles Acacias 51 y Carmen Cobeña 2 de Madrid

Apuntalamiento de muros de sótano que se ejecutan por bataches. Se planteó el sistema PIPERSHOR porque, aunque eran cargas medias (225 kN/m en la zona del edificio colindante y 70

Apuntalamiento mixto formado por los sistemas Megaprop y Granshor. Debido a la geometría del solar y por la exigencia de recoger prácticamente todas las pantallas, se diseña una celosía simple

Acodalamiento de muro pantalla con nuestro sistema tubular PIPESHOR y puntales MEGAPROP. Nuestros puntales tubulares de gran capacidad de carga, canto reducido y rápido ensamblaje, permitieron al cliente realizar tanto

Sistema de Acodalamiento mixto compuesto de puntales MEGAPROP para luces pequeñas y celosías GRANSHOR para grandes luces y cargas elevadas. El sistema de acodalamientos INCYE, gracias a su rápido ensamblaje,

Shoring of the walls at the level of coronation beam for high loads, using pairs of triple props Megaprop braced in plant. Once pre-assembled the system allows its movement to

Shoring of piles with distribution beam RMD300 Due to the loads, truss was required with simple upper and lower Megaprop beams, braced to each other in plan for square supports,

Shoring of piles with distribution beam RMD300 Load transmission system with Megaprop reinforced single strut with lower truss, which allows large spans with minimal arrows.

Megaprop structure with trusses with double upper and lower beams for high load support. Stabilize retaining walls during the excavation phase to the lower counterbore

Shoring of walls made with Megaprop, triangular frames and telescopic tensioners.

Pile coronation beam shoring system, using Megaprop single strut lightweight system with top truss to make excavation tasks as easy as possible.

Shoring of retaining walls using Megaprop quadruple prop for high load support. The system allows its movement to different positions adapting its adjustment thanks to angles of rotation and Megaprop

Megaprop structure with truss of simple upper and lower bead that allows load support for large spans, thus allowing emptying for the execution of the current headquarters of the College