Bridges and Viaducts

Bridges and viaducts

Specialists in formwork and falsework for the construction of Bridges and Viaducts and a leading company in the Iberian Peninsula since 1991. Our systems provide formwork and falsework solutions for decks of any cross-section, with any support conditions in the most efficient way possible. 

System definition

For the execution of concrete decks for Bridges and Viaducts, INCYE has Falsework and Formwork systems combining the different types of shoring elements.

With the modular system of Superslim primary beams and T-200 secondary beams, which allows formwork and support to the reinforcement and pouring of concrete for the execution of the boards of these structures.

Simplicity and versatility

The assembly of our structures is always simple and versatile, from the Kwikstage and Alshor Plus modular falsework system, or the mechano system for Megaprop high-load towers, through a wide family for spanning-beams and H33 trusses for higher span, up to the modular system for custom formwork with SS and T-200 beams. Always standard equipment for tailored solutions.

Safety

All systems used for the execution of Bridges and Viaducts present in all their types, both shoring and formwork, a wide range of accessories, including work platforms, edge protection systems and access systems, which guarantee safety both in the assembly phases as well as in the finished structure phase.

Cost effectiveness

Our product range is designed to provide high strength and maximum efficiency. This wide range of designs with INCYE equipment enables a specific solution for each type of structure, and thus lower assembly times and costs. This means that we can design structures with a minimum of components and the guarantee of the most profitable solution for the needs of work.

Main systems

Alshor Plus

Lightweight, high-capacity, modular aluminum falsework system with up to 120 kN SLS per foot, with built-in safety and productivity features that maximize your efficiency.

Megaprop

Beams designed to support axial loads of up to 1,000 kN SLS per foot. Its mechano configuration allows to generate towers of any section and height according to the needs of the work.

INCYE steel beams

INCYE standard beam systems, configurable for both distribution beams and frame systems, reach a maximum length of 16m, with different sections depending on the need.

H33 trusses

Modular trusses system with a heavy-load capacity, to cover spans greater than 16m, with the possibility of transversely arranging it in packages according to the needs of the section to be supported.

Superslim

They are lightened beams with a working load capacity of 150kN SLS. It is the most versatile light meccano, used as a primary beam for the generation of formwork structures.

T200

Beam with upper and lower chord made of solid wood, with central plywood core joined to the chords by toothed joint. Used as a secondary formwork beam.

WOLD YOU LIKE MORE INFORMATION ABOUT OUR SOLUTIONS?

SUCCESS CASES

Download our catalog
of success cases